There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
This has been happening to most of mine & my family’s t-shirt type material clothes for a while now.
What i don’t understand though is, why is it 99% of the time at the front, waist area of the item of clothing? If it was random it would happen anywhere on the item, but it doesn’t, it’s almost always at the front, waist area.
I have a Bosch 1200, about 7/8 years old now.
I think what the previous person (Charlotte) said was very interesting, that it could be the ‘paddle’ although i’m not sure where abouts to find it in the machine. But again surely the holes would be more randomly placed, not just at the front?
To be honest were thinking of getting a new washer as we are also suffering with the ‘smelly washing’ syndrome too
(where the clean washing comes out smelling musty)
Anyway, i hope the manufactures deal with this problem soon & stop sweeping it under the carpet, as its obvious there is a problem with ‘holes in washing’
Mrs B.
R Badham: Yes, holes only appearing at the front waist area of items of clothing cannot be being caused by the washing machine. It’s impossible for a washing machine to only inflict holes in specific places on specific items. They should be very random.
Your smelly washing machine problem could be helped by reading this section – Washing machine smells – causes of grease, slime and black mould inside washing machines
I have had the same problem for the last year. Holes in cotton shirts at belly button area. Only my shirts, no one else in house. Cause = wearing cotton shirts with jeans and rubbing against countertop (soapstone/granite/laminate – doesn’t seem to matter). The light weight cotton shirt, combined with friction against jeans(metal button and fabric protruding), and countertop causes holes. Try it and you will see. Put on your jeans, and your light weight cotton shirt, and rub against the countertop for less than one minute and you will see wear immediately and may also get holes right away. I did. Happening more to women than men as women are typically in the kitchen more. Going to wear an apron in the kitchen from now on. For some that are not in the kitchen much, maybe it is the same concept, but instead of the countertop it is friction with a seatbelt.
I have been experincing this for 2 years now, only in 1 particular area at the bottom of the garment, cotton and cashmere, I am going to try the friction test.
I have tried the friction test, and that is what causes the small area of holes always in the same place at the bottom, my worksurfaces are granite, after the rubbing of this against the button at the top of my jeans small holes appeared, not straight away but about 1/2 – 1 hour later. I will never have a granite worktop again it has cost me a fortune.
Has anyone found a solution to the hole in front of shirt problem? I see that you were going to contact manufacturers last December and wonder if there was a resolution? I am a writer for Glamour magazine in the US having this problem and did a google search and found your article. Any help appreciated. Thanks. Andrea
Hello Andrea: One solution appears to be wear caused by friction from large belts, jeans, and even kitchen worktops. If holes are only appearing in the front of shirts it has to be caused by friction somewhere. The washing machine can’t put holes only in specific places and specific types of clothing.
Hi all, posted at 58 and 59 and have enjoyed seeing how the hole quandry has evolved. I concluded as have others that the front ‘waist’ area holes are indeed caused by friction between a belt buckle pin and a kitchen worktop. And since posting I have had a new kitchen installed with a lower worktop (NOT to avoid holes! I guess I’m just pants with a tape measure) and hey presto no more holes whatsoever. So, get a new kitchen or wear heels and or braces. Could be a hot new look.
Rob Anderman, London, still too much time on my hands.
I am so glad I found your site as I thought I was going crazy. People telling me that washing machines can’t be making holes in clothes and that they must have been there before being washed. Well my washing machine too (a Bosch 1200 spin, 5 KG drum) is making holes in t-shirts. Its four years old and I don’t think it did it from new however its definitely been happening for the past year! I’ve had an engineer out who told me that there was nothing wrong with the machine or drum – no bra wires, or sharp edges. I’m pretty sure its due to the fabric being pushed through the holes in the drum as the holes in the t-shirts are a similar size. I think my only solution is to buy another but what to buy? If spin speeds and drum size are to blame then things are only going to get worse. I am so reluctant now to put my clothes in the washing machine as they are quite expensive. My dad’s suggestion was to hand wash everything. Great! so in the world of washing we are actually going backwards. I have used a lot of cheap, old washing machines in my time and never got holes in my clothes so it definitely is something to do with newer machines. I will contact Bosch and inform them of the problems I have been having as manufacturers need to put some research into this. I’d much rather have an older, smaller, slower spin speed washing machine that didn’t ruin my clothes. I was shown an older drum design in a shop the other day which was tear drop shaped and was told that the newer design was supposed to be kinder to clothes. Did the tear drop shaped drums actually put holes in clothes though?
Hello Anonymous: Have you read the bit about holes in t shirts being caused by rubbing against belts or even kitchen worktops? Washing machine is very unlikely to only pick out t shirts. This is especially relevant if the holes are always in the front.