John Lewis JLDWW1201 dishwasher safety notice
This recall affects John Lewis JLDWW1201 dishwashers with serial numbers between 62400001 and 72399999. The John Lewis dishwasher is manufactured by the AEG-Electrolux group and is affected by the same issue covered by the AEG-Electrolux and Zanussi dishwasher safety notice. Do not use the appliance until you have received clearance from the manufacturer.
A safety recall has been issued for the John Lewis JLDWW1201 dishwasher. If you own one of the affected models, stop using the appliance immediately and do not use it again until you have contacted John Lewis or the relevant helpline. See below for affected serial numbers.
Affected Appliance
Brand: John Lewis
Serial numbers: 62400001 to 72399999
The John Lewis JLDWW1201 dishwasher is manufactured by the AEG-Electrolux group. It is affected by the same safety issue as other dishwashers in the AEG-Electrolux and Zanussi range. Check the serial number on your appliance – it is usually on a label inside the door frame or on the side panel.
What to Do
-
Stop using the dishwasher immediately.
Do not run another cycle until the appliance has been inspected or cleared. If a cycle is currently running, allow it to complete and then do not start another.
-
Check the serial number.
The serial number is on a label inside the door frame or on the side or back panel of the appliance. If the serial number falls between 62400001 and 72399999, the appliance is affected.
-
Contact the recall helpline or John Lewis.
Contact John Lewis directly or the product recall helpline to register the appliance and arrange an inspection or remedy. Do not use the dishwasher until clearance has been given.
This recall was not prominently publicised alongside the related AEG-Electrolux and Zanussi dishwasher safety notice despite covering a product from the same manufacturer group. Owners of John Lewis-branded dishwashers from this period should check their serial numbers even if they did not receive direct communication about the recall. See our guide on the AEG-Electrolux and Zanussi dishwasher safety notice for background on the related issue.
All Appliance Safety Notices
Related Safety Notices
AEG-Electrolux and Zanussi Dishwasher Safety NoticeThe related safety notice covering AEG-Electrolux and Zanussi branded dishwashers from the same manufacturer group.
Hotpoint Dishwasher Safety NoticeFire risk safety notice for certain Hotpoint FDW series dishwashers.
Bosch, Neff and Siemens Dishwasher Safety NoticeSafety notice covering certain Bosch, Neff, and Siemens dishwasher models.
8 Ways to Make Appliances SaferPractical steps every household can take to reduce fire and electrical risks from large appliances.
Safety Notice Electrolux, AEG and Zanussi Dishwashers
This notice covers specific Electrolux, AEG-Electrolux and Zanussi-Electrolux dishwasher models with serial numbers between 62400001 and 72399999 (with a specific exception for AEG-Electrolux model F50765 – see below). Check the rating plate on the right side of the dishwasher door for the model number, PNC, and serial number. A related notice also covers the John Lewis JLDWW1201 dishwasher, which is manufactured by the same group.
A safety notice was issued for certain Electrolux, AEG-Electrolux and Zanussi-Electrolux dishwashers due to a purchased connector component presenting a potential fire risk. No product bought before June 2006 is affected. If your model number and serial number appear in the table below, stop using the dishwasher and switch it off at the wall immediately.
Affected Serial Numbers
The notice affects dishwashers with serial numbers between 62400001 and 72399999.
For model F50765 only, the affected serial numbers are: 62400001 to 62799999, and 64100001 to 70799999, and 71700001 to 72399999. Serial numbers between these ranges on F50765 are not affected.
How to Check Your Appliance
The model number (Mod), PNC, and serial number (S.N.) are printed on the rating plate on the right side of the dishwasher door frame. The location is also shown in the user guide supplied with the appliance. Both the model number must appear in the table below AND the serial number must fall within the affected range for the appliance to be covered by this notice.
Affected Models
| Brand | Model | PNC |
|---|---|---|
| Electrolux | ESF46010 | 911616240 |
| ESF46010S | 911616241 | |
| ESF66010 | 911916312 | |
| ESF66010S | 911916313 | |
| AEG-Electrolux | F440801D | 911925623 |
| F440801M | 911925601 | |
| F440801VV | 911925624 | |
| F50765 * | 911916296 | |
| F50870 | 911916618 | |
| F50870M | 911916619 | |
| F54750 | 911615221 | |
| Zanussi-Electrolux | ZDF601 | 911916269 |
| ZDF601K | 911916270 | |
| ZDF601M | 911916281 | |
| ZDF601S | 911916271 |
* F50765 has different affected serial number ranges – see the warning above.
This safety notice does not affect any other Electrolux, AEG-Electrolux or Zanussi-Electrolux appliance. A related safety notice covers the John Lewis JLDWW1201 dishwasher, manufactured by the same group – see our guide on the John Lewis JLDWW1201 dishwasher safety recall.
All Appliance Safety Notices
Related Safety Notices
John Lewis JLDWW1201 Dishwasher Safety RecallThe same connector issue affecting the John Lewis branded version of this dishwasher range.
Hotpoint Dishwasher Safety NoticeFire risk safety notice for certain Hotpoint FDW series dishwashers.
Bosch, Neff and Siemens Dishwasher Safety NoticeSafety notice covering certain Bosch, Neff, and Siemens dishwasher models.
8 Ways to Make Appliances SaferPractical steps every household can take to reduce fire and electrical risks from large appliances.
Tumble dryer fire risk caused by filter
Clean the lint filter after every tumble dryer cycle – not weekly, not when it looks full, after every use. Vented dryers typically have one filter; condenser dryers can have two or three. A torn or damaged filter must be replaced immediately – fluff that bypasses the filter can reach the heating element and start a fire.
Lint and fluff accumulating inside a tumble dryer can ignite if it reaches the heating element. This is one of the most common causes of tumble dryer fires. The main lint filter must be cleaned after every single cycle – more often if drying towels or bedding. Condenser dryers may have two or three filters – check the instruction manual for all locations.
Why Filter Cleaning Matters
Tumble dryers work by circulating hot air through the drum. As this air passes through damp laundry it picks up moisture – and loose fibres. These fibres accumulate in the lint filter. A clogged filter restricts airflow through the drum, making the dryer work harder and longer to dry the same load. This increases energy consumption and drying time.
The more serious consequence is fire risk. When the filter is blocked or bypassed, loose fluff can circulate further into the machine and come into contact with the heating element. Lint is highly flammable. A dryer fire typically starts inside the machine and can spread rapidly.
What happens with a blocked or neglected filter
- Reduced airflow through the drum – longer drying times
- Higher energy consumption per load
- Overheating of internal components as airflow is restricted
- Lint bypassing the filter and reaching the heating element – fire risk
- In severe cases, compressed fluff build-up that is virtually impossible to clean without disassembling the machine
With a clean filter after every cycle
- Full airflow maintained through the drum
- Drying times and energy consumption remain at intended levels
- No accumulation of fluff in internal areas near heat sources
- Filter remains intact and effective
How to Clean the Tumble Dryer Filter
-
After every cycle, remove and clean the main lint filter. The filter is usually located just inside the door opening. Pull it out, peel off the accumulated lint with your hand, and refit it before the next use. This takes 10 seconds and should become automatic. -
Check the instruction manual for additional filter locations. Condenser dryers typically have a second filter – often accessed via a panel at the front base. Some models have a third. These secondary filters need less frequent cleaning but should be checked and cleaned regularly. Find your manual via our appliance user manuals page if needed. -
Check the filter for damage when cleaning it. A torn, cracked, or damaged filter allows fluff to bypass it entirely. A damaged filter must be replaced – a missing or damaged filter is more dangerous than a clean machine because lint goes directly into the internal workings unimpeded. Replacement filters for most models are available at Spares4Appliances. -
Do not run the dryer without the filter fitted. Never operate a tumble dryer with the filter removed, even for a single cycle. All lint produced goes directly into the machine interior.
Cotton towels, sheets, and similar heavy items shed significantly more lint per cycle than most other laundry. The filter fills faster when drying these items and should be checked mid-cycle if drying a large towel load, in addition to cleaning after the cycle ends.
Known Safety Notices Involving Dryer Fluff and Filters
Several tumble dryer models have been subject to safety notices specifically related to fluff and filter faults. In some cases the machine’s design allowed lint to bypass the filter and reach the heating element even when the filter was clean – resulting in fires. These notices affect millions of machines.
The Hotpoint/Indesit/Creda tumble dryer recall covers millions of machines where a design fault caused fluff to reach the heating element regardless of filter cleaning. See our guide on Hotpoint, Indesit and Creda tumble dryer fire risk, and our full tumble dryer safety notices list.
Tumble Dryer Safety
Related Guides
Hotpoint, Indesit and Creda Dryer Fire RiskMillions of tumble dryers affected by a design fault causing fluff to reach the heating element – check if yours is covered.
Tumble Drying Duvets – Fire RiskWhy duvets and large items create a fire risk in most domestic tumble dryers – and the six safety rules to follow.
Never Stop a Tumble Dryer Mid-CycleWhy interrupting the cool-down phase can cause smouldering in hot laundry even after the drum stops.
8 Ways to Make Appliances SaferPractical steps every household can take to reduce fire and electrical risks from large appliances.
Frequently Asked Questions
How often should I clean the tumble dryer filter?
After every single cycle – not weekly, not when it looks full. Lint accumulates in the filter during each use and even a partially blocked filter restricts airflow and increases fire risk. Clean it before starting the next load. The process takes about 10 seconds.
My tumble dryer has more than one filter – where are they?
Condenser dryers typically have two or three filters. The main lint filter is usually just inside the door opening. The secondary condenser filter is often accessed via a panel at the front base of the machine. Some models have additional filters at other locations. Check the instruction manual for your specific model – all filter locations and cleaning frequencies should be listed. If the manual is not available, download it via our appliance user manuals page.
Is it safe to use a tumble dryer with a torn filter?
No. A torn or damaged filter allows lint to bypass it and circulate into the machine interior where it can reach the heating element and ignite. Replace a damaged filter before using the dryer again. Replacement filters for most models are available as spare parts. Operating a dryer with a damaged or missing filter is more dangerous than operating it with a clogged filter.
Don’t use fabric softener on children’s sleepwear
The flame-resistant properties built into children’s sleepwear are chemically treated into the fabric. Fabric softener deposits a coating on fibres that interferes with this treatment, reducing its effectiveness over repeated washes. Manufacturers of leading detergent and softener brands explicitly warn against using fabric softener on flame-resistant garments. The rule applies to any garment labelled as flame resistant, not only children’s sleepwear.
Fabric softener reduces the effectiveness of flame-resistant treatments in children’s sleepwear and other garments labelled as flame resistant or flame retardant. This applies to both liquid fabric softener added to the wash and to dryer sheets used in the tumble dryer. Always check the care label on children’s sleepwear and nightwear before adding softener.
What the Warning Means
Most children’s sleepwear and nightwear sold in the UK is required to meet fire safety standards. Garments either use inherently flame-resistant synthetic fibres or are treated with a flame-retardant finish. These treatments do not make the fabric fireproof – they slow the rate at which it ignites and burns, which can be the difference between a minor incident and a serious injury.
“We caution against using any fabric softener on children’s sleepwear or other garments labelled as flame resistant – as it may reduce flame resistance.”
Fabric softener manufacturer product warning
Fabric softener works by coating fibres with a lubricating agent that makes them feel smooth and soft. On flame-resistant garments, this coating sits on top of the flame-retardant treatment and partially blocks it. Over repeated washes with softener, the protective properties of the garment degrade faster than they otherwise would.
Which Garments Are Affected
Children’s sleepwear and nightwear
UK safety regulations require children’s nightwear to meet fire safety performance standards. This covers pyjamas, nightdresses, dressing gowns, and similar items worn to bed. Most children’s sleepwear carries a care label that includes a warning against fabric softener – check the label before washing.
Any garment labelled “flame resistant” or “flame retardant”
The warning is not limited to children’s clothing. Any adult or children’s garment labelled as flame resistant or flame retardant – including some workwear and protective clothing – should not be washed with fabric softener. Check the care label for specific washing instructions.
Flame-resistant fabric slows the rate of ignition and burning – it does not prevent the garment from catching fire. Reducing the flame-resistant treatment through repeated softener use removes even this partial protection. The care label instructions exist for this reason and should be followed.
Fabric Softener and Towels
A related point worth noting: fabric softener has a waterproofing effect on towels and other absorbent fabrics. The same coating that makes fabric feel soft reduces the fibres’ ability to absorb moisture – which directly reduces how effectively a towel dries. Omitting fabric softener from towel washes maintains their absorbency. If the dryer is used, tumble drying itself softens towels without any chemical assistance. See our guide on when fabric softener is unnecessary.
Related Guides
Related Guides
Save on Fabric Softener When Tumble DryingWhy tumble drying naturally softens laundry – and why fabric softener reduces towel absorbency.
Children, Pets, and Appliance SafetyKeeping children and pets safe around washing machines and other domestic appliances.
Fabric Softener Taken Out Too SoonWhy softener is flushed during the wash rather than the rinse – and how to fix it.
Fabric Softener Not Being Taken OutWhy softener remains in the dispenser after the cycle and the common causes.
Frequently Asked Questions
Can I use fabric softener on children’s pyjamas?
Not if they are labelled as flame resistant or flame retardant. Fabric softener reduces the effectiveness of flame-resistant treatments in children’s sleepwear, degrading the protection the garment is designed to provide. Check the care label – most children’s sleepwear will carry a warning against fabric softener. If the label is unclear, it is safer to omit softener from the wash.
Does fabric softener permanently damage flame-resistant clothing?
The effect is cumulative. Each wash with softener further reduces the effectiveness of the flame-resistant treatment. The garment does not become instantly unsafe after one wash with softener, but the protective properties degrade more quickly than they would without softener use. Once reduced, the flame-resistant treatment cannot easily be restored.
Does this apply to dryer sheets as well as liquid softener?
Yes. Dryer sheets work by the same mechanism – depositing a softening coating on fabric fibres during the tumble dry cycle. This coating has the same effect on flame-resistant treatments as liquid fabric softener added to the wash. Both should be avoided on flame-resistant garments.
Dishwashers in fire scare
This notice covers specific Electrolux, AEG-Electrolux and Zanussi-Electrolux dishwasher models with serial numbers between 62400001 and 72399999 (with a specific exception for AEG-Electrolux model F50765 – see below). Check the rating plate on the right side of the dishwasher door for the model number, PNC, and serial number. A related notice also covers the John Lewis JLDWW1201 dishwasher, which is manufactured by the same group.
A safety notice was issued for certain Electrolux, AEG-Electrolux and Zanussi-Electrolux dishwashers due to a purchased connector component presenting a potential fire risk. No product bought before June 2006 is affected. If your model number and serial number appear in the table below, stop using the dishwasher and switch it off at the wall immediately.
Affected Serial Numbers
The notice affects dishwashers with serial numbers between 62400001 and 72399999.
For model F50765 only, the affected serial numbers are: 62400001 to 62799999, and 64100001 to 70799999, and 71700001 to 72399999. Serial numbers between these ranges on F50765 are not affected.
How to Check Your Appliance
The model number (Mod), PNC, and serial number (S.N.) are printed on the rating plate on the right side of the dishwasher door frame. The location is also shown in the user guide supplied with the appliance. Both the model number must appear in the table below AND the serial number must fall within the affected range for the appliance to be covered by this notice.
Affected Models
| Brand | Model | PNC |
|---|---|---|
| Electrolux | ESF46010 | 911616240 |
| ESF46010S | 911616241 | |
| ESF66010 | 911916312 | |
| ESF66010S | 911916313 | |
| AEG-Electrolux | F440801D | 911925623 |
| F440801M | 911925601 | |
| F440801VV | 911925624 | |
| F50765 * | 911916296 | |
| F50870 | 911916618 | |
| F50870M | 911916619 | |
| F54750 | 911615221 | |
| Zanussi-Electrolux | ZDF601 | 911916269 |
| ZDF601K | 911916270 | |
| ZDF601M | 911916281 | |
| ZDF601S | 911916271 |
* F50765 has different affected serial number ranges – see the warning above.
This safety notice does not affect any other Electrolux, AEG-Electrolux or Zanussi-Electrolux appliance. A related safety notice covers the John Lewis JLDWW1201 dishwasher, manufactured by the same group – see our guide on the John Lewis JLDWW1201 dishwasher safety recall.
All Appliance Safety Notices
Related Safety Notices
John Lewis JLDWW1201 Dishwasher Safety RecallThe same connector issue affecting the John Lewis branded version of this dishwasher range.
Hotpoint Dishwasher Safety NoticeFire risk safety notice for certain Hotpoint FDW series dishwashers.
Bosch, Neff and Siemens Dishwasher Safety NoticeSafety notice covering certain Bosch, Neff, and Siemens dishwasher models.
8 Ways to Make Appliances SaferPractical steps every household can take to reduce fire and electrical risks from large appliances.
Second Safety Notice: AEG-Electrolux and Zanussi-Electrolux – Different Models
A separate safety notice covers a different set of AEG-Electrolux and Zanussi-Electrolux dishwasher models from the same period. No product bought before July 2006 is affected by this notice.
Affected serial numbers for this notice: 62700001 to 64099999 and 70800001 to 71699999. The model number and PNC number are on a rating plate at the right edge of the door – drop the door fully open and look at the edge of the door frame.
| Brand | Model | PNC |
|---|---|---|
| AEG-Electrolux | F50765 | 911916296 |
| F50765 | 911516005 | |
| Zanussi-Electrolux | ZSF6161 | 911916239 |
| ZSF6161 S | 911916240 | |
| ZDF501 | 911516002 | |
| ZDF501 S | 911516007 | |
| IZZI ALU | 911915225 | |
| ZSF6161 N | 911916260 | |
| ZSF6161 X | 911916265 |
This safety notice does not affect any other AEG-Electrolux or Zanussi-Electrolux appliance. Contact Zanussi or Electrolux group customer services directly for current recall status and remediation. The manufacturer’s consumer helpline for this notice has been closed – contact via the manufacturer’s website or general customer service number.