There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
Following up on my earlier post (#19)…
We changed our machine for a Hotpoint Aqualtis late last year and as far as I’m aware are no longer getting holes in clothes. The bearings on the old one had definitely gone and given that the holes were “random” it looks like this was the cause.
That said, after reading the entire thread I’m willing to believe that not all holes in clothes are the fault of the machine. I will keep an eye out for any recurrence in our household.
I have been experiencing holes in my clothes as well for the last year. They have been mostly cotton. The holes randomly appear in various places on the garments and not at waist level. Most of the clothes are mine, but a couple were my husband’s cotton shirts. The holes are usually uniform, but sometimes it looks like acid was spilled on the garment with big sections missing on the front and back sides. The fabric sometimes just seems to have rotted. I can’t find any rough spots on my washer or dryer and removed the spindle to check if properly seated. I have no problem with clothes catching between the dryer door and the drum. What is strange is that my old cotton shirts that never seem to wear out have never been affected.
My washer and dryer are older but have never caused me any problems and there is no trace of cotton “pieces” floating around. I never overload,and I wash on gentle cycle and dry permanent press. No trace of moths or carpet larvae, either. My carpet is 8 years old and laundry problem just started a year ago.
Janet: Your comment about it sometimes looking like acid was spilled made me think of bleach although it’s hard to imagine how bleach would have got onto them.
There are photos looking similar to how you describe here Holes in my holes in clothes pictures
I have just read the comments on this website with amazement after searching google for answers as to why holes are appearing in my washing. Its been happening to me on and off for the past 3-4 years and my latest washer (Bosh) is only 2 years old. After consulting friends, one of whom was having the same problem and phoned for an engineer to check her washer, she told me that he had suggested she started washing on the ‘easy care’ cycle as it could be to do with the pressure of the water when its first released into the wash. I disputed this as I have watched mine fill up empty to test it (isn’t my life boring I hear myself say – but only cos I am nuts with this problem too….!!!) and the water in mine dribbles out. Needlesstosay, I am now washing all my clothes on the easy care cycle (40) as a precaution but adding the ‘wash plus’ button to whites as the programme is a bit short. To date, we seem to be ok so his could be worth a try. I have also reduced my spin to 900. Good luck everyone
Hello Jo: It does sound a little bizarre to say the water coming into the machine could be causing holes in garments. As you say it merely trickles onto the laundry and can’t possibly enter the drum with any real force. Water comes in at mains pressure through the water valves and through into the soap dispenser where it runs down a hose into the tub. If by any chance this was causing any problems it’s clearly a design fault but I can’t imagine why he would say that.
Apart from anything the water comes in the same regardless of which programme you use. I wonder if something’s been lost in translation somewhere. The difference in the easy care programme may be less agitation and it is gentler on clothing.
At the end of the day though, if the washing machine was causing the holes it would clearly not be fit for purpose.
re article – random holes in clothes
A friend of mine with many years experience as an engineer has advised that it is caused by a combination of the following, overloading iniatialy then spinning mostly at high speed which then forces the clothes to partially protude through the small drain holes in the drum, the outer part of the drum having sharp edges due to being machine punched then snag the clothes and as the spin speed reduces and fall away from the drum and then cause small tears.
Hello washerman01443. Thanks for your contribution. All this is mentioned in my original article with several other possible causes too. The problem is if 20 people have the problem there’s likely to be several different causes.
The first thing I say is to check is that you aren’t spinning items at the wrong speed or overloading. However, many people have commented saying they are definitely using the washing machine correctly and get random holes.
The problem with the explanation given by the repairman is that most people’s holes in clothes are being caused in cotton, which can, and should be spun at full speed. Therefore if the holes are being caused by the clothes being forced through the holes in the drum then that would clearly be a design fault in the washing machine. Also, people have complained of having holes in clothes even from a Miele washing machine which has a honeycomb drum, which has no sharp punched holes at all on the other side.
its a mystery to me – I have just chanced a white wash with kids clothes that were stained that needed a long wash (not easy care), plus some of my own but kept spin to 900. It wasn’t a full load. My nice new white cotton t shirt came out with 2 holes. I couldn’t believe it – I don’t know what to think – other that get a laundry bag to protect certain items.
Jo: Your problem is typical. You are not overloading or spinning too fast which is the only explanation washing machine manufacturers and engineers are giving yet you have holes in cottons. The item affected is new so you can’t even blame wear and tear.
I have links to several protective laundry bags at the bottom of the original article.
We need more people to send me photos of the damaged clothes so we can all have a look and see exactly what kind of holes they are
Holes in clothes photos
like so many others who have commented here, I have similar experience of holes in clothes:
just in last year or so
only cotton t-shirts (GAP, Oasis, Zara..ie cheaper – though one was whistles)
always in front, about 3 inches from bottom of t-shirt
i’m doubtful that it could be the washing machine or bugs/ moths, due to the consistent pattern of the holes….I would agree it might be something to do with belts or waistband of jeans..
also I’ve washed really delicate clothes in my machine (a 2 year old Bosch – and I use woolite for most washes) but the holes are only in the t shirts i wear with jeans..
also I checked cotton T shirts I wear to into work, and these had no holes (would never wear these tops with jeans)