Holes in clothes after washing

Holes-in-jeans There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.

However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.

What’s causing holes in clothes after washing?

Clues There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.


One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.

The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.

They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.

In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.


At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.

Make sure you are not inadvertently causing the holes in clothes

If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.

If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.

To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.


Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed

  • Cottons: – 1400 rpm
  • Minimum iron: – 1200 rpm
  • Delicates: – 600 rpm
  • Woollens: – 1200 rpm
  • Silks: – 400 rpm
  • Shirts: – 600 rpm
  • Denim: – 900 rpm

Make sure you aren’t overloading the drum

Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.

In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.


Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?

Other possible causes of holes

Bra wire (or underwires)

Bra Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.

Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.


If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!

Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets

Other obstructions in the tub, a damaged drum, loose drum lifter etc.

Pound-coin Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.

Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.

Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.


If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)

Zips and buckles

As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.

Biological detergents could damage woollens and silks

I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.

This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes

Insects – Moths?

Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?


Removing a drum paddle (lifter) to gain access to the bottom of the tub

Bleach

Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.

DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element

If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.

Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.

Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.

However, this article looks at where is the heater and how to remove it?


DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.

If tiny holes are appearing only in t-shirts at the front

Shirts-coloured This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.


Photos of damaged laundry

For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.

Try this experiment

Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.

Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.


Protect t-shirts and other laundry when washing

Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction

Comments now disabled

There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.

However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.

Repairs

Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..

Save Money Now

Subscribe to Which? today and start saving money now. Subscription offers often available.

Spares

Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.

Comments Policy

Comments must be on topic with the article


292 thoughts on “Holes in clothes after washing”

  1. we have recently moved house and all of a sudden small holes have started to appear in the front (all at waist height) of both mine and my wifes cotton clothes (t-shirts and others) after washing. we have checked all surfaces at the height that may cause a rip, but there is nothing.as others have posted it is most confusing. Some t-shirts i have had for a while others literally worn once…there seems to be no discrimination as to the age of the garment.
    i can see from above that there seems to be little or no explanation as to why this occurs…..anyone?

  2. Bev, reading through your comments i see that we have the same problem….did you ever work it out, is it still happening?

  3. Ok, this is for everyone experiencing holes at the front below the waistline. I don’t have the definitive answer but reading other comments combined with my own exprerience I think we’re nearer the truth. About 2 years ago (this is significant) holes as described in these posts started to affect only t-shirts in my wardrobe. Always in clusters,always within 3 inches of the bottom seam in the centre of the front. So, what is it?
    -It’s not lavae/moths (nothing else affected,girlfriends clothes are fine.How do they know to eat in one place?)
    -It’s not solely the washing machine( again girlfriend and lodgers clothes are fine,againm the specific area of holes)
    -It’s not recreational cigarettes.
    -It’s nothing sharp they come in to contact with.

    Initially it was thinner tops but now it includes medium weight cotton. The timing is key here as it’s when I gave up work to become a stay at home dad. I used to wear a suit to work, my lovely tops were worn in the evening in front of the TV or occasional nights out. I will now put a t-shirt on at 7am, do the Dad stuff, including walking 4-5 miles a day and take it off at night.I also cook every meal and after testing I do rub against the worktop when chopping etc .

    Reading other reports I’m certain it’s the massive increase in wear and tear combined with the tops all being fairly new. I haven’t checked the country of origin but I’d bet it’s cheaper made and a finer or less substantial knit. It wears thin (once after 3 wears) you wash it, it stretches and bingo-Holes.

    A single test of this is a YMC t-shirt. Fairly thin, 10 years old, worn all the time. Still has great shape and colour and NO holes. It’s Italian cotton.My guess is many brands now source from the far east (Even Paul Smith, £120 for a jumper made in China? No thanks!) I also have Evisu jeans (Itallian),12 years old, still fine. Bought some far east made Lee jeans 8 months ago, crotch is through already.

    I’ll speak to a couple of fabric manufacturers (I have time on my hands) for there opinion but untill then I’m convinced it’s poorer quality combined with extra impact. Still doesn’t sort my wardrobe out but should I buy a top tomorrow I’ll damm want to no the provenence of the material. We do it with cars, meat, furniture. It’s time to do it with cotton!

    Sorry it’s so long. I’m slightly obsessive.

    Rob Anderman. London.

  4. Reckon I’ve worked ot the front T-shirt holes in my case, maybe it’s the cause in all the others. I cook 3 times a day and have a grained laminate work surface. I wear a metal belt buckle. I f you rub up/down or left /right as I do when preparing food it takes no more than 3-5 “impacts” to put a hole in thin cotton.It seems to be where the fabric is squeezed between the buckle “pin” and the abraisive worktop edge. Even without the belt it will go through after a bit more contact.However I do accept that it’s only tops bought in the last few years that suffer and it’s reasonable to assume they are of a lower resistance/quality compared to stuff I wear from the 90’s. I can’t believe I’ve put up with the smell of moth balls for 2 years when it was simply making dinner that has wrecked my wardrobe.
    This solution was suggested by a poster on an American forum so I simply followed his experiment exactly and achieved the same results.That I believe, is science.

  5. Isn’t it funny that Washing Machine engineers haven’t heard of this problem (yeh right!!). Today, after several phone calls and an email to customer services, managed to get a Zanussi engineer to call to check out my machine free of charge! Of course he couldn’t find anything wrong with it, all he did was run his hand around the drum and the seals, which took approximately 5 minutes. After studying my holey washing, his comment was “it must be the way you’re washing it luv”. After 30 years of wasing clothes this was like a red rag to a bull and ended in a stand up row in the kitchen. He left to send his report back to Zanussi who I’m waiting to hear from with baited breath! Where do I go from here??

  6. Lindsay: I’m not surprised you were angry if he was as patronising as that. The big problem with this issue is that there are many different causes of holes in laundry. If the washing machine is to blame it should be damaging all different types of laundry and in random places.

    Anyone getting holes only in certain types of fabric and in certain areas should look for another explanation because a washing machine cannot place holes in specific places and on specific garments.

    Also a washing machine is likely to tear clothes, or cause friction damage if they get trapped between the outer drum and the door seal which engineers will commonly blame on overloading. Overloading can result in this sort of damage but so can a badly designed washing machine (more commonly washer dryers) or one with a large gap between the drum and the door seal or a badly elliptical drum. Overloading should be avoided but in my experience more people underload than overload.

  7. we’ve got the same problem and as spending my sunday evening trying to find the bug responsible, but reading this clearly it’ s possibly something as abstract as wear on worktop or sub-standard cotton – i am going to investigate those options first.

    thanks to the great posts on here, particularly Rob (#58 & 59) – this is clearly a wider spread issue than i thought.

    Rob, get a hobby!

    thanks

  8. Did a white wash yesterday and one t-shirt came out with a small hole on the back at about shoulder blade level. The material is completely missing but does not appear to be ripped but has slightly jagged edges to it as usual.

    I don’t expect Lindsay to get any more joy from Zanussi than I did a couple of years ago. They virtually dismantled my machine on the kitchen floor and couldn’t find anything wrong with it so would not accept any responsibility for damaged laundry.

    Doesn’t seem to be any rhyme or reason to any of this and it is driving me nuts!

  9. I have had this problem for at least 5 years, maybe as long as 10. It’s always cotton t-shirts. Area varies from the waist to the back, to the top and on the front! The holes are tiny, around 2-3mm to around 5 mm. The material from the centre is always missing. It is VERY ANNOYING when it is a new or favourite top. I have been in tears of frustation over this sometimes. I have had it happen with many different washing machines. My current machine only 1 year old LG direct drive 7.5kg is now doing it, or so I believe! We lived in the States for 3 years and it happened then too. It was happening with my machine (a bosch) before we moved to the States and it happening with the machine before that! (can’t remember the make). It never happens with the kids school shirts, only jersey soft knit type cotton. I have found it on the odd pillowcase too. I am now wondering about the substandard cotton theory too after reading all this. It can’t be all my machines and all my detergents. I am very careful with my laundry, it happens with washes that have had no buttons, zips/fasteners in too. I never wash at more than 1200 spin and never overload. It got to me so much a few years ago that I started washing clothes inside an old duvet cover for extra protection for a while, I think it may have worked but not sure. I may try this again now. I am so glad I found this on the internet I always thought it was just my problem! None of the washing machine engineers I have dealt with over the years acknowledge this problem at all. I will keep checking back now for more comments.

  10. Soft cotton will get forced through the holes in the drum on spin. The faster the spin the more they will get pushed through. If they catch the top of the heater bracket or anything trapped between the tub and drum it can cut the fabric – although this clearly shouldn’t happen. (However, I suspect the gap between the revolving drum and outer tub may have decreased over recent years as drum sizes have increased). This could result in small holes with section of fabric missing. Make absolutely sure the t-shirts can be spun at the speeds you are spinning them. Lots of t-shirts have the “no tumble dry” symbol on the label too so it’s best to comply with that.

    In the absence of any known cause (or cure) anyone affected may be better off using protective washing nets.

Comments are closed.

Comments must be on topic with the article

Scroll to Top
Version 26.03