Holes in clothes after washing

Holes-in-jeans There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.

However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.

What’s causing holes in clothes after washing?

Clues There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.


One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.

The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.

They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.

In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.


At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.

Make sure you are not inadvertently causing the holes in clothes

If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.

If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.

To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.


Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed

  • Cottons: – 1400 rpm
  • Minimum iron: – 1200 rpm
  • Delicates: – 600 rpm
  • Woollens: – 1200 rpm
  • Silks: – 400 rpm
  • Shirts: – 600 rpm
  • Denim: – 900 rpm

Make sure you aren’t overloading the drum

Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.

In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.


Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?

Other possible causes of holes

Bra wire (or underwires)

Bra Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.

Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.


If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!

Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets

Other obstructions in the tub, a damaged drum, loose drum lifter etc.

Pound-coin Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.

Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.

Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.


If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)

Zips and buckles

As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.

Biological detergents could damage woollens and silks

I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.

This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes

Insects – Moths?

Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?


Removing a drum paddle (lifter) to gain access to the bottom of the tub

Bleach

Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.

DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element

If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.

Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.

Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.

However, this article looks at where is the heater and how to remove it?


DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.

If tiny holes are appearing only in t-shirts at the front

Shirts-coloured This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.


Photos of damaged laundry

For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.

Try this experiment

Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.

Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.


Protect t-shirts and other laundry when washing

Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction

Comments now disabled

There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.

However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.

Repairs

Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..

Save Money Now

Subscribe to Which? today and start saving money now. Subscription offers often available.

Spares

Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.

Comments Policy

Comments must be on topic with the article


292 thoughts on “Holes in clothes after washing”

  1. to elaine:

    i don’t know how the machines work that make the clothes, but i’m assuming that if they are faulty, then the fabric throughout the entire garment would be faulty. as such, i’m not sure how faulty fabric throughout the entire garment would explain holes only appearing in the same areas all the time on multiple garments.

    faulty fabric might make it *easier* for holes to form in certain areas, but it isn’t the *cause* of the holes. a physical process – such as repeated exposure to friction – is needed to actually cause the hole to form.

  2. my washing machine is driving me insane it was new in september and it is putting small holes in clothes i have tried different spin speeds but this has not helped. i have contacted the online store where i purchased it who told me to contact the manufacturer which i have done on several occasions. the paddles are loose in the drum these have been replaced but are still loose and i am absolutally sure this is what is causing the problem and i believe that everyone who has holey clothes will have loose paddles in their drum….i just dont know where to go from here as no one seems to want to help despite my washing machine having a 5 year parts and labour garantee

  3. hi katie, the comments on this article have proved that there are many different possible causes for holes in laundry, some of which are not even related directly to the washing machine, which is why it is so difficult to get to the bottom of.

  4. California here… with tiny holes in our shirts, too. I’ve looked for common denominators in all the many blogs about it. IT”S NOT THE WASHING MACHINE OR DRYER. Here’s what some people have suggested: raggedy seat belts, moths, waterbugs, granite, washing machines, dryers, all countertops, belts, zippers, obesity, even a belly button disorder. But the one thing those of us who’ve spent a fair amount of money on thinking we’re getting clothing to last, well, maybe more than a year.. is the fabric itself. Friction and bad fabric? Why did it start happening in the last few years? What’s the common denominator with all the fabric developing these holes, even in the first hour of wearing? any friction.. one time.. Ive been wearing tee shirts all my life, never had this happen before. Whats changed? Cotton and cotton blends have changed. Where’s it being made? How’s it being made? These are the questions we should be asking. People are spending a lot of money and companies are making a lot of money selling them. I purchased all of my 7 holey shirts from Garnet Hill. They took all of them back very graciously, but had no answer. I tried contacting Velvet/Graham & Spencer, the manufacturer, 3 times – they were rude, disinterested, management never called back. Whatever happened to pride of product? It’s up to us to get them to figure it out. I urge you to call the manufacturer, ask them what’s up? It’s unacceptable for them to continue making this crap! Someone’s making a whole lot of money doing it and we’re paying for it. I’m going to start a blog with the names of companies who manufacture these things – hopefully this weekend. Will let you know.. it’ll be called “HOLEY SHIRTS” What do you think?

  5. I have a Miele washing machine and wash all my T shirts on the minimum iron wash at 900 RPM. My first thought seeing holes appearing in my sons T shirts at the front was his belt. However, it then started happening to several of my T shirts. It is not on all of them and is randomly picking designer T shirts or very cheap T shirts.
    Having read all the comments, I have come to no real conclusion except that I have washed clothes, worn seatbelts, stood by granite worktops, used different conditioners and not had holey T shirts until the last 2 -3 years so something has changed but cannot work out what.

  6. I recently changed soap powder and myself and my daughter have discovered holes in both our families clothes, so it must be the detergent and not the machines because it’s two different washing machines and we discovered the holes in our laundry at the same time. We are not putting too much detergent in the wash cycle or put our clothes on the wrong washing cycle. What sticks in my mind is years ago a washing powder manufacturer changed their recipe for their washing powder and as soon as people used this product it was ruining their clothes.

  7. Last June I purchased a Hotpoint Aqualtis AQ9F492UV Washing Machine, it can take a 9kg load. I am also having the same problem with pinhead sized holes appearing in my clothes. Curiously, mainly in the front/abdomen region. It is a real mystery. We are all experiencing this problem yet there doesn’t seem to be one solution to prevent this happening. I will try a slower spin and also put the more delicate items in the washing bag. Having said that I have never considered a cotton tee shirt to be regarded as a ‘delicate’ item. I have been using different Hotpoint machines for over 30 years, until recently I have never experienced this problem before. As other postings mention this is an extremely infuriating and expensive situation.

  8. Hazel, IT”S NOT THE WASHING MACHINE! It’s the fabric and friction. The holes only appear below the belly button area, counter height, belt or pant height, counters, belts, pants.. Either the processing of the fabric has changed and/or its due to fibers that are too thin – when there’s any amount of friction there, little holes appear. Bring or send the shirts back to where you purchased them and have them deal with the manufacturer. Make a stink, but don’t blame Hotpoint or Miele or any of em’. It’s the companies making the shirts we need to be complaining to. Perhaps putting pressure on both industries.. will encourage them to fix the problem. We’re spending good money on clothing that look awful sometimes in the first wearing, let alone within a year. It’s ridiculous.

  9. PEACHA you make perfect sense and its the first explanation that I have heard that hits it head on!
    It cannot be the machine because the holes wouldn’t be concentrated in one area. Your posting makes sense and clearly explains the reason those darn holes are appearing in all of our shirts. EVERYONE READ PEACHA’S POSTING…IT IS CORRECT! I”m done wondering now.
    Thanks
    Diane

  10. Diane: It says exactly that in the actual article, and in many of the comments. It just goes to show it’s all too long for people to read now :)

Comments are closed.

Comments must be on topic with the article

Scroll to Top
Version 26.03