Holes in clothes after washing

Holes-in-jeans There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.

However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.

What’s causing holes in clothes after washing?

Clues There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.


One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.

The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.

They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.

In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.


At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.

Make sure you are not inadvertently causing the holes in clothes

If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.

If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.

To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.


Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed

  • Cottons: – 1400 rpm
  • Minimum iron: – 1200 rpm
  • Delicates: – 600 rpm
  • Woollens: – 1200 rpm
  • Silks: – 400 rpm
  • Shirts: – 600 rpm
  • Denim: – 900 rpm

Make sure you aren’t overloading the drum

Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.

In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.


Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?

Other possible causes of holes

Bra wire (or underwires)

Bra Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.

Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.


If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!

Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets

Other obstructions in the tub, a damaged drum, loose drum lifter etc.

Pound-coin Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.

Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.

Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.


If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)

Zips and buckles

As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.

Biological detergents could damage woollens and silks

I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.

This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes

Insects – Moths?

Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?


Removing a drum paddle (lifter) to gain access to the bottom of the tub

Bleach

Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.

DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element

If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.

Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.

Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.

However, this article looks at where is the heater and how to remove it?


DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.

If tiny holes are appearing only in t-shirts at the front

Shirts-coloured This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.


Photos of damaged laundry

For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.

Try this experiment

Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.

Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.


Protect t-shirts and other laundry when washing

Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction

Comments now disabled

There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.

However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.

Repairs

Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..

Save Money Now

Subscribe to Which? today and start saving money now. Subscription offers often available.

Spares

Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.

Comments Policy

Comments must be on topic with the article


292 thoughts on “Holes in clothes after washing”

  1. I also have a Miele washing machine with a honeycomb drum and have had to throw away many tops because of random holes appearing in the fabric. I have just thrown away a Next blouse which had only been washed a few times because two small holes appeared in the fabric. Never had this problem with my old Neff washing machine.

  2. This is an interesting and puzzling article. I have a Zanussi Jetsytem 7kg washing machine 1600rpm spin. My t-shirts have holes in them dotted all over and one of my duvet covers has a large hole in it. I had thought it was because of the “paddle” on the door seal as the thicker fabrics like towels are fine. My gran refuses to use fabric softener as she said it weakens the fabric (I don’t use fabric conditioner on my towels or denim).
    Most of my t-shirts and thin cotton tops have holes in them (but not my underwear or shorts), I have noticed the wash time is 2hrs 37minutes long on Cottons so also thought the holes could be due to sustained friction as the washing tumbles are much longer and more intense than my last machine.
    My duvet cover has two fabric types on it. The top is polyester and the bottom is cotton. The wash label said to wash as Cottons so I did. After a few washes a hole about 1cm big appeared at the top end of it, so replaced it (the pillow cases are of the same fabric yet are fine). I replaced the set with the same one and also got another one of the same fabric but a different design/ pattern. The one that was the same got a hole in exactly the same place and size despite washing as synthetics yet the other duvet of a different design/ pattern is as a good as new.
    I use Ariel Excel gel, Ariel Excel gel colour and Persil Biological tablets for my whites due to the bleaching agents in them, I always use Ariel Gel stain remover. I use Lenor and comfort concentrated fabric conditioners. I live with my friends and none of their items have holes in. One uses only Surf liquid and the other uses Ariel excel gel and vanish plus comfort concentrated fabric conditioner.
    Would love to know the cause as I can’t afford to keep replacing my t-shirts.
    My theory to sum up is lengthened wash times and washing tumbling intensities (sustained friction) and concentrated fabric conditioners. I might do a test and wash all my new t-shirts on quick wash (lasts 40mimutes and see how that fairs.

  3. My theory is that it has nothing to do with washing machines and everything to do with seatbelts, I started pulling my tops over the lapbelt ayear or so ago and the the holes have stopped appearing.

  4. Thanks val: There’s definitely not one single cause, some are caused by the washing machine but many are caused by other things. Friction during wear such as from kitchen worktops, belts buckles, or as you suggest seatbelts is a definite alternative possibility.

  5. Ever since we bought a Miele 3824 in 2007 we have been experiencing the problem of small holes appearing in fine cotton T shirts, particularly Superdry. The holes appear in random locations and frequently on the first wash – the items are then unwearable. We are quite certain the machine is at fault as we did not experience the problem until we changed. My wife is extremely careful with all the washing and uses non-Bio Fairy, sometimes with Comfort . We have contacted Miele who were not interested. Has anyone had any success in pursuing a manufacturer? There appear to be one or two red herrings in this thread regarding Granite worktops, zips and belts which are quickly picked up by the manufacturers but still the main issue appears to be the appearance of tiny random holes.

  6. I purchased an LG 8k washer two years ago. I have never previously had holes in my clothes, in the past I have always had an Hotpoint. In the last two years I constantly find new small holes in clothes. I have had to throw away quite a few items because of this. At first I was spinning clothes at either 1000 or 1200 rpm. I now spin all washes at just 800 rpm. I don’t have any silk clothes. Still, even at 800 rmp I continue to find small holes in my clothes. I have checked the drum and there is no damage. I was considering buying another new machine but after reading the comments on here am not sure it would solve the problem. It’s very expensive and irritating especially when it’s a favourite garment!

  7. I have examined our drum in some detail. The holes positioned around the hexagons of the honeycomb seem smooth but where the honeycome becomes flat, at the rear of the drum and next to the paddles the holes seem slightly abrasive when rubbed with a stocking. It seems unlikely that all the manufacturers are making their own drums and perhaps no one wants to admit the cause as it might affect so many machines? We now spin clothes below 900rpm which has helped reduce the number of holes but the Miele does no enable you to reduce the spin time.

  8. My husband believes that the problem is caused by the clothing manufacturing process. For example in the case of T-shirts, the “knitting machine” may have 3 or more little pegs that would hold the material in place when either the material or the garment is being made. This causes a weaker fiber in that area. Rejected theories: bugs wouldn’t eat a garment in the same area, peolple have listed owning all types of counters like granite and formica, both top loading and front loading washers have been mentioned (I actually have a top loading washer with out a wringer that works like a front loading washer), no detergent or washer, for that matter will cause holes in the same area, people said it has happened to new garments.It has to be something with the way these clothes are made!

  9. to elaine:

    you said that, “…the problem is caused by the clothing manufacturing process.”

    are you talking about the problem of random holes appearing in garments, or the problem of holes always appearing in the same area on garments?

    thanks

Comments are closed.

Comments must be on topic with the article

Scroll to Top
Version 26.03