There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
Yes Clare: I would say two things.
A washing machine cannot put holes only in the front of t-shirts.
A washing machine should never rip t-shirts (or any other item) just because other cotton items are washed with them, and if it does it’s clearly badly designed.
I’ve come back to this forum after quite a while because we’re still getting holes in our laundry despite engineer visits and having the most gentle Miele Honeycombe drum machine. My wife has also recently got a hole in a brand new expensive cotton t-shirt which has only ever been hand-washed once.
It’s very interesting that this problem only seems to appear with cotton and no other fabric, even silks!
My young daughter wears organic cotton baby clothes and she has never had a hole in any of them, despite using a more vigourous machine cycle (40 degrees express, rather than 30 degress delicate).
Therefore I am beginning to wonder if the problem lies in the type of cotton being used, maybe even genetically modified, or subjected to heavy use of pesticides.
It would be interesting to hear if anyone has experienced holes in organic cotton clothing.
After using my washbags for a while and having no probs, took the tshirts out the bag and hey presto two had a tiny hole again. Paranoia set back in and i again checked every garment before and after the wash and couldnt believe that holes where reapearing but only the odd one. I decided to check my drum from top to bottom with a torch and on random holes in the tub could see tiny peices of metal inside the holes. I got a wooden cocktail stick and gently each one in turn checked each hole (some may call me sad) but was gob smacked at how the stick was snagging on these goles just inside and not going round each one smoothly. I looked at my sisters machine for comparison, she has an indesit, same makers as hotpoint which i have and her drum is as smooth as a babys bum no offending metal bits. After all my hassle with my last machine (brought from beko) which was shredding the clothes and hassle from beko themselves ,my husband decided to take matters into our own hands. Armed with a tiny metal file ,a torch and a cocktail stick we set to work and gently filed every single offending hole and checked for smoothness with the stick. Intrestingly half the drum seemed to be smooth and the other rough, we carried on till the whole drum was done. Two hours later, and after several test washes and spins at highest speed poss, there is absolutley no damage, not one hole, nothing. All i can presume is that the drums are not being finished off properly and the shap edges formed when the holes are punched are not being filed down smooth enough. Im still a little paranoid at wash times but everything seems ok ,lets keep fingers crossed!
I own a Hotpoint Ultima which is 4yrs old and in the last year I have noticed small holes in T shirts and tops. Some of the garments are new and at the first time of washing holes have appeared. I use the quick wash at 30deg 800 spin speed on most of my clothes to try and preserve them so I am frustrated to find them damaged. I never overload the drum so and cannot understand whats happening.
I have just put another t shirt on the washing line and found a small hole in the front. I am fed up of buying new t shirts or worse still wearing a t shirt with small pin prick holes in the front. I have washed my t shirts together on 3 differnet cycles. Wool wash, quick wash and 30˚ wash and found no difference.
I must admit not everyone of them has had a hole but find it is the expensive ones that seem more susceptable to this curse. Please somone find an answer!!!
grandma – if the holes are appearing only in the front, then it’s not the washing machine causing the holes. there is something else that is causing some regular wear there….
I am still having ongoing issues with holes (despite a drum change a few years ago) and was very interested to see Simon’s comments (28 August) as I also have a Miele with a honeycomb drum which I spent a fortune on specifically to avoid this sort of problem. Last week my daughter’s t shirt came out with two holes in it after a 900rpm spin (wouldn’t dare use anything higher for anything other than towels). It wasn’t just nips in the thread this time – they were proper holes, perfectly spaced to match the holes in the honeycomb drum. The t shirt was brand new and unworn. It went straight from the shopping bag into the washing machine. I subsequently did the ‘stocking’ test yet again which didn’t indicate anything untoward (surprise) and am looking forward to what I believe will be yet another inconclusive visit from a Miele engineer next week. Based on my past experience as well as this incident, you will have a hard time convincing me that it is not the machine. My problem is how can I prove this to Miele?
I thought i would google this issue and came up with this forum…My family has had random ripping of clothes out of the machine for years. T hsirts, blouses etc…The area looks stretched and then there are huge holes. I thought maybe bra straps but just took aloadout of machine. T shirts only. 5 of them. 1 has 2 big holes and is stretched in area?I have checked drum and nothing visible.
What couldcause this? The machine was not overloaded. It was a brand new t shirt – first time to wash. nothing evident in drum. No bras etc or zippers
I am so pleased to have found this site. I really was thinking that it’s just me who has these problems with holes. The holes are always at waist height and yes, I do have granite work surfaces. They are usually in my more expensive T shirts – White Stuff seem to be the worst. I also use Comfort fabric conditioner, which seems to be a common thread and I have a Hotpoint machine. Not sure what the answer is, but will try wearing an apron and see if that helps.
Hello!
Im so glad to have found this website!
I have been getting holes in all my new favourite clothes, which is very upsetting! The areas where the holes are are very streched out, and have some white stuff on them. Can this be moths or the washing mashine? Some one please help!