There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
I too have had problems with holes. I ‘ve noticed them in t-shirts and undies mostly, but have found them on other things too. This never happened before we got our new, large, fast-spinning machine a few months back. From reading I am gathering that the fast spin, or friction with something behind the drum during the spin may be causing the problems. I think the worn clothes, or the nearly worn out spots must go first, hense, why fronts of t-shirts often get holes. I haven’t noticed a certain spot on our clothes, just that it has been primarily the more worn cotton items. Thanks for the help.
When I switched from a top loader to a front loading washing machine (Bosch), I noticed our clothes getting small holes or cuts in them. I used top loading machines for most of my life with no problems, not having to worry about spin speed, etc. In the end, the solution for me turned out to be using a (much) slower spin cycle. I only use 800 or 600 now, treating all of my clothes and other items as delicate. Since I made the switch no more holes in our clothes. The holes used to appear in clothes, sheets and duvet covers, not in towels but towels tend to be a different tougher weave.
If front loaders used to be okay, then it could be a combination of factors coming together. A cheaper way or making cotton or cotton clothes, higher spin cycles but also with the emphasis on energy savings and eco are newer washing machines using less water? Perhaps less water + higher spin cycles + more cheaply made clothes can equal holes in clothes. Top loaders generally use more water or so I’ve heard.
Re White Stuff
I also had a brand new White Stuff tunic – Jersey Cotton do this – I have returned it for refund and replaced it – I will let you know whether they refund – on the phone they told me it sounded like a cotton fault.
Hi,
I get tiny pin holes on the lower front of t-shirts.
I have used both top loader and front loader washing machines and the problem happens when using both types of washing machine.
Top loaders agitate and front loaders rotate the washing but the holes still appear.
The holes are always at the front lower portion of t-shirts below the stomach.
I may hand wash some t-shirts and see if hand washing stops the holes.
I suspected that it was coming from say bleach in and around the kitchen when wiping surfaces or splashes of diluted bleac.h.
These holes have been happening to my shirts for years,
Just bought a t-shirt and within one week of wearing it it has over 5 pin holes.
maddening!!
Paul
Further to my previous posting, I contacted White Stuff about the tiny holes which keep appearing in my tops – now 5 different tops! I have lots of cotton tops from other shops (mainly Gap, Boden, Next) and this has never happened to any others. I use non-bio washing liquid and have a 6 year old Miele washing machine.
White Stuff have politely suggested that it is to do with how I have treated the tops, but said they can be returned within 6 months of purchase for a refund provided I still have the receipts (which I don’t sadly).
Having read some of the postings on this site, I will try changing the spin speed in future when I am washing White Stuff things (the machine defaults to 1400 normally) and I will hold on to receipts for all future purchases.
OMG..I can’t believe someone else has the same hole problem as me!!..I keep finding the same thing on my tops as well. Small pin holes on the bottom of my tops. Why only the bottom of the tops is a mystery. First i thought that these holes was due to ware and tear. So i binned them. Then after buying new tops and the same thing happeneing to them after only a week is so weird, and very annoying!!
RELIEF AT LAST. Have been fed up over the last few weeks of tiny holes in MY tops. I thought it was moths but have never seen one and have new wardrobes so thought it highly unlikely. Ended up searching on web and found this site. It was recommended to do a test with a nylon tight over hand and feel around drum. I done this straight away and WOW found the culprit in seconds. There was a tiny pin loose in there. Not a pin I have used, I reckon it was in an item of clothing I had brought.
I am so happy and hope this is the end of it. THANK YOU.
This has just started happening for us. Mostly in cotton t shirts a few towels but nothing else. HOwever, nothing ever before still I started using a wash ball. I only use it for towels and my son’s wash. It wouldn’t get the smell out of work clothes. But I can’t really say what is causing it, that is all I have to go on since I have had the Samsung front loading washer for much longer than I have been using the wash ball.
At first I thought my son was causing the holes, they were always at the front top near the neck. But then I started seeing them at the back on the bottom. Tiny little holes, when you hold up to the light looks like stars. I have checked inside the washer and found nothing that could be causing it. I might have to try the washing of a new shirt like suggested. But in the mean time everything else is continuing to get damaged.
Hi.. came upon this site actually this morning when I had my better half taking my machine apart for the umpteenth time trying to see if there is anything caught beneath the drum of my Zanussi ZNW 1200 W which is about three years old and has since day one being causing small holes in tee shirts and shirts and childrens cloths.. usually of cotton.
Originally I was in two minds whether it was the washing machine or the dryer as I got both at the same time.. but as the dryer has been out of order for a while.. and the holes are still appearing.. as recently as yesterday (hence the taking apart today).. I now know it is the washing machine.
Originally when it was happening I got an engineer round who told me there was nothing wrong with the machine and it must have been the dryer.. not much good to me now as the machine is out of warrenty but the damage is still being done.
I use non-bio and sometimes bio.. depending on the amount and type of wash.. and the spin I use is always the 1200 spin for cottons.. unless it is delicate fabrics.. then it is a lower spin and a cold wash or the delicates cycle.
No matter what I do.. the holes still keep appearing.. and it is not confined to a specific area of tees.. it can be back, front, arms etc
The worst was a very expensive shirt I bought for my husband which got a complete rip in the front after one wash,.. that was NOT a good day at all.
I am at a loss.. as having had numerous machines and with four kids.. this has only been happening with this machine in the past three years.. I am starting to wonder if it is the size.. as this is the first time ever I have gotten such a large machine .. a 7kg.
I thought it would be good as we have so much laundry to do.. but in essence this has cost me more in clothes then the machine did initially.. and I rather think I am going to chuck it if I dont sort it by the end of the summer. It is not worth all the damage..
Thanks for the photos Andrea: I’ve added one to the ones I have so far Holes in clothes photos (Holes in clothes photos 4).