There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
I have a miele washing machine and was suffering with the holes in the t-shirts problem.
Having tried various options of washing powder, cycles and consulting the engineer, I have begun washing all bras separately from other washing. Have done so for about 4 weeks and so far – no holes!! They are not underwired but I wonder if it is the clasp that catches in the drum and creates the hole!
I have had a Dyson washing machine for about 5 years now, for the last year, I have had lots of ruined clothing from small holes to tears, this is becoming more regular, and is now ruining all my bedding, brand new duvet covers, washed for the first time with about 5 or 6 small holes appearing after wash, I have recently noticed that some of the holes have black marks round them which looks like oil. I am at my wits end now trying to discover what is causing this, have phoned Dyson but they say it will cost £95 to send an engineer out.
We too have a problem with our washing machine making holes in our clothing. It is a Hoover 1600, 9 months old and until three weeks ago there was not a problem. However, we now have holes in socks, sweaters, a shirt, and the stitching ripped on a pillowcase and a shirt. I did a hand wash and then spun two sweaters and these also came out of the washer with holes. I contacted the retailer by phone, and was told it could be a too high spin (we have not used the high spin), or putting too much washing in the machine, (this has not changed over the many years we have been putting clothes into a washing machine!) They also said to do a maintenance wash and if this did not correct the problem, then to ring them again. I fail to see how this could correct the problem!
Having read most of the comments from other people who have had similar problems, it appears to be the fault of the ‘modern’ washing machine. Also if a high spin is blamed for causing these problems, then why are manufacturers making such machines and for what item of clothing can it be used for?
I am so glad to finally stumble on this forum, as I have been despairing over my lovely Boden & Crew tops, all of them in slub cotton jersey material. And, yes, they only appear on the lower front part of the garment (abdomen). I have a Bosch Exclusiv F1100A which admittedly is 15 years old and use the IVS setting to spin. But I have never ever had problems with it until these slub cotton tops, and where the holes appear certainly isn’t random. Could it be the material themselves? I now wash them in short wash in a bag but to no avail (and I hate sewing and mending!). If anyone has any answers, I would love to hear them.
keep in mind that if the holes aren’t appearing randomly throughout the garments, then they are almost certainly not being caused by the washing machine – but rather some activity that is causing some wear in the location of the holes. so it’s just a matter of figuring out the cause of the friction that is causing the holes….
The holes (I am afraid) are not caused by the washing although the washing helps identify the holes. The problem of the holes is caused by the manufacturer when making the clothes. When processing the clothing they are stressing the fronts of the clothing articles. You must hold up the clothes under the bright florescent store lights to insure that your new clothing is not already damaged. Don’t buy it if you see inconsistent light coming through.
Please tell the clerks of the potential holes. The foreign clothing manufacturers need to correct this Huge problem!
I don’t know if it’s down to washing but from my experimants, it was down to the texture of the material.
I used to believe it was down to moths and froze my clothes and kept them in sealed bags. But was surprised how some items in the same drawer would be fine yet others had holes, even brand new items. I also considered the washing machine, and hand washed them.
The ones with the holes were 100% cotton .
The ones that were intact had a tiny bit of lycra.
As to the socks – I also thought this was down to moths until I went online and read about piling. Plus if you have arched feet or hard skin even a small amount, this can cause problems with holes and laddering.
But I have to wonder why it seems to be just happening in recent years – whether the some changes have been made the the way cottong clothing is made perhaps.
On the subject of moths, some years ago I read how one shop had to get rid of their entire new stock of clothing from overseas because it arrived infested by moths.
Perhaps some shops don’t have stringent enough checks and moths may be to blame for some of the problems?
I’ve been suffering these problems as well. Two years ago I moved from a condo to a house, and in the process went from a top-loader (with dryer above), to a front-loader, and I started to notice random holes in my t-shirts. These are front, back, sides and arms, so I know it’s not because I’m rubbing on something. They’re always the same size (very small), and they’re driving me crazy. I hang nearly everything, so I know it’s the washer. Extremely annoying, and frustrating.
I am delighted to have stumbled across this site. I have got three 100% cotton White Stuff cotton tops which have all developed small holes at the front (centre, middle). I am quite sure it is nothing I am doing as I have many other cotton tops and this has not happened to them. I am just about to White Stuff about it, and I will let you know what their response is.
Helen C, I look forward to hearing about your response from White Stuff.