Holes in clothes after washing

Holes-in-jeans There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.

However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.

What’s causing holes in clothes after washing?

Clues There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.


One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.

The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.

They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.

In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.


At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.

Make sure you are not inadvertently causing the holes in clothes

If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.

If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.

To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.


Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed

  • Cottons: – 1400 rpm
  • Minimum iron: – 1200 rpm
  • Delicates: – 600 rpm
  • Woollens: – 1200 rpm
  • Silks: – 400 rpm
  • Shirts: – 600 rpm
  • Denim: – 900 rpm

Make sure you aren’t overloading the drum

Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.

In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.


Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?

Other possible causes of holes

Bra wire (or underwires)

Bra Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.

Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.


If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!

Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets

Other obstructions in the tub, a damaged drum, loose drum lifter etc.

Pound-coin Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.

Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.

Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.


If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)

Zips and buckles

As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.

Biological detergents could damage woollens and silks

I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.

This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes

Insects – Moths?

Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?


Removing a drum paddle (lifter) to gain access to the bottom of the tub

Bleach

Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.

DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element

If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.

Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.

Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.

However, this article looks at where is the heater and how to remove it?


DeodorantChris (who used to work for a cosmetics company) added a comment to this article suggesting deodorant can damage the fibres on laundry and he could be on to something especially as many people spray across their front whilst wearing a top these days – Comment on deodorant and damage to laundry
Research this topic further by reading the topic started on my washing machine forum where several different people have contributed – Small Holes In Clothes After Wash: My washing machine is slowly eating my clothes NOTE: The forum is currently read-only. If you have anything to contribute to this topic please leave a comment here or ( Contact me ).

I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.

If tiny holes are appearing only in t-shirts at the front

Shirts-coloured This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.


Photos of damaged laundry

For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.

Try this experiment

Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.

Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.


Protect t-shirts and other laundry when washing

Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction

Comments now disabled

There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.

However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.

Repairs

Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..

Save Money Now

Subscribe to Which? today and start saving money now. Subscription offers often available.

Spares

Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.

Comments Policy

Comments must be on topic with the article


292 thoughts on “Holes in clothes after washing”

  1. Thanks for the update Simon. Did they not charge you? A plastic shirt collar stuck inside isn’t a machines fault so you did well if they didn’t try to charge for their time. I agree with you that holes caused by catching on it wouldn’t only appear on certain parts of a garment though.

  2. Hi Andy,

    Miele sent the 2nd engineer for free this time as I spoke to a manager in customer services. They also agreed to waive the charge of the first callout after I grovelled on the phone :)

  3. Hi there,

    This is really interesting stuff, we have had a Miele 520 Novotronic for the past 3 years or so. Bought the machine for a slightly bigger drum and because of the reputation of Miele. We have 4 children and have been finding small holes up to 5mm in many items of clothing since we had the machine. Miele have sent out 6 engineers up to date and have even removed the drum. Miele say they cannot find anything wrong with the machine and will have to charge for any future call outs.

    More holes have appeared in clothes over the past couple of days. We have always used the same detergent which is an Ecover non bio liquid and the Ecover softener. We use these for their softness and natural content as my wife suffers with a skin complaint. The items of clothing ruined have mostly been cotton t shirts, pyjamas, children’s cotton trousers and also items of bamboo clothing from designer companies.

    The ruined garments have been from different places in the world i.e. Egyptian cotton and Indian cotton and some items made in Turkey etc, which rubbishes one of Miele’s possible solutions that some cotton is not as good as others. Currently waiting to speak to another manager on the case as I really am convinced this is a manufacturing fault as we are really careful in ensuring all garments are being washed on the recommended programmes. It is my guess that certain garments are being sucked into the drum holes and being damaged in that way. We are furious about the loss we have suffered and I would love to take this to Watchdog.

    Anton

  4. to anton:

    just curious – are the holes in only certain areas on the garments, or are they randomly all over the garments?

  5. Hi Jeff, the holes in our clothes are fairly random and have appeared lower and upper, front and back, sleeves and trouser legs. Although the percentage of garments with holes in central and lower regions is higher, we would assume this is generally due to dynamics and the shape of the garment to where the force of the spin will pull the t-shirt or trousers in.

    thanks
    Anton

  6. We have a Gorenje 7kg drum 1400 spin machine. Since buying it a few months ago and never experiencing holes in clothes prior to purchase a few small holes have started to appear in clothes. I could never be 100% sure that the holes were not there before until I wore a new cotton top on Saturday night and when I washed it Sunday it had a hole in the front of it. Obviously, now I am certain all the other holes were caused by the washing machine. Only in cotton items but not in one particular place. I think I will be contacting Groenje about this.

  7. Fame at last!

    Seriously, thanks Andy.

    Interesting to read the comment from Anton about dynamics and the shape of the garment leading to the front getting more holes than anywhere else.

    Holes mostly appearing in the waist area of garments have been the washing machine manufacturers main defence, usually blaming granite worktops. Not sure if it’s possible to disprove that theory.

  8. Hi Simon:

    Holes mostly appearing in the waist area of garments have been the washing machine manufacturers main defence, usually blaming granite worktops. Not sure if it’s possible to disprove that theory.”

    They might have even got that theory from these comments :-)

    I’m not sure the dynamics and shape should make much difference. If it was the washing machine I would expect towels to be equally affected, and cotton sheets, anything cotton really. If it’s mostly t-shirts that’s strange, and if added to that it’s mostly in the same place on t-shirts that’s extremely strange.

    When inside the drum the garments get tossed around at random and when in spin laundry is plastered to the sides with some laundry on top of other items. It’s hard to see how t-shirts would mostly only present the front area to the face of the drum, and even if they did why would only the bottom of the front of the t shirt be holed?

    If it does turn out to be anything to do with washing machines in some of these cases my personal theory has always been if the gap between the outer tub and the inner drum has been reduced to accommodate larger drums it could allow protruding cottons to hit the heating element, its bracket or even parts of the out tub but again, shouldn’t damage caused by this be in totally random places?

Comments are closed.

Comments must be on topic with the article

Scroll to Top
Version 26.03