There appears to be a problem with many washing machines routinely “causing” small holes in laundry. Judging from the correspondence I’ve received so far it is happening to a lot of people, with different makes of washing machine and with various drum sizes and spin speeds. Therefore, finding a pattern and identifying a definite cause is proving difficult.
However, almost everyone is blaming the washing machine. This article attracted 298 comments (bottom of this article) before being closed. They indicate that many of the holes may not be caused by the washing machine after all, though washing machines can clearly cause holes in laundry.
What’s causing holes in clothes after washing?
There is no one simple answer to the cause of holes in clothes but a detailed look at this article and its comments may help.
One common theory is that the quality of many modern fabrics are to blame, that they are too thin. It may be necessary to try and work out the cause by process of elimination and looking for clues. It’s not as simple as just blaming the washing machine.
The people having problems are finding holes routinely appearing in denim skirts & shirts, cotton shirts, t-shirts, sheets, dresses, corduroy skirts etc. so the problem doesn’t seem to be confined to one type of laundry. Up to now, many people who have complained to their washing machine manufacturer have been told the same thing.
They’ve been told the fault lies with themselves, and that they are probably spinning certain items too fast.
In my experience, many faults are caused by customers either misusing appliances or not reading instruction books (or the wash labels on the laundry!) properly so they are naturally the first suspects.
At this stage it is unclear whether or not there is a problem with the design or quality of some washing machine drums and tubs that could account for lots of small holes in laundry. However, it makes sense for anyone getting holes in their laundry on a regular basis to make absolutely sure that they are not inadvertently causing the problem themselves before pursuing a manufacturer or the seller of the appliance.
Make sure you are not inadvertently causing the holes in clothes
If you are experiencing regular random holes in your washing you need to check that you are not washing items on wash programmes with a final spin speed that is too fast for them. This is the explanation some manufacturers have given to customers who complained about holes in washing.
If you know you are definitely using the washing machine correctly then at least you can say with confidence that the manufacturer, or their engineer is wrong if they try to blame incorrect spin speeds for the damage.
To help you decide you really should check out the instruction book but here is a rough guide from my Miele 1400 rpm spin washing machine operating instructions which has a 6kg drum.
Different manufacturers and different models of washing machine may vary but this chart shows that certain items should not be spun at full spin speed
- Cottons: – 1400 rpm
- Minimum iron: – 1200 rpm
- Delicates: – 600 rpm
- Woollens: – 1200 rpm
- Silks: – 400 rpm
- Shirts: – 600 rpm
- Denim: – 900 rpm
Make sure you aren’t overloading the drum
Many people don’t realise that different types of laundry have different wash load capacities and that exceeding them amounts to overloading.
In most cases the consequences are more likely to be reduced wash efficiency but if you put a full load of denim, or shirts on a wash programme that does the maximum spin then the manufacturer could claim some may get damaged.
Here is a link to a previous article showing the maximum recommended loads for certain fabrics (again, consult your washing machine’s instruction book because the load sizes will vary amongst manufacturers and models – especially models with larger or smaller drum capacities) Laundry comes out of washing machine badly creased?
Other possible causes of holes
Bra wire (or underwires)
Bra wires are an extremely common problem with washing machines. Many of them (especially from cheaper bras) escape during the wash and get trapped under the drum.
Commonly you will hear a gentle metallic scraping noise as the drum turns but depending where it settles it may not make any noise at all. The ends of bra wires can be sharp, especially if they break. As the clothes are forced through the small holes in the drum (particularly cottons) during spin they can snag on the underwire and cause damage to the laundry.
If underwires from a bra are removable they should always be removed before washing. I’m sure many of them are supposed to be hand washed only!
Here’s an article I’ve published about washing nets designed specifically to protect a bra in the washing machine – Bra washing nets
Other obstructions in the tub, a damaged drum, loose drum lifter etc.
Coins and other metallic obstructions commonly cause problems with washing machines. They can damage the drum or loosen and break the plastic drum lifter (paddles) leaving a small hole or gap where laundry can snag.
Carefully examine the drum for dints or even tears, maybe an elongated drum hole that now has a sharp edge. TIP: Try using a nylon stocking stretched over a hand to feel all the way round a drum and paddles to see if anything snags.
Check none of the drum lifters or paddles are damaged or loose revealing a hole with sharp edges.
If you have a loose or broken drum paddle (lifter) it can cause damage to clothes. You can buy a replacement drum lifter or paddle for your washing machine on Spares4Appliances Drum lifter (paddles)
Zips and buckles
As a precaution try turning garments with zips inside out after zipping up the zipper. Watch out for garments that have metal buttons or buckles. Also try placing delicate laundry in net wash bags.
Biological detergents could damage woollens and silks
I’ve just written another related article describing how some holes in clothing could be caused by using biological detergent.
This issue is only related to silks and woollens though – Biological washing machine detergents can damage woollens and silks causing holes
Insects – Moths?
Don’t forget that certain insects and moth larvae can damage clothes. They cause lots of small holes that look very similar to the holes in clothes photos I’ve received. Obviously if holes only appear in specific places on clothes (like only the front lower part of a t-shirt) it’s not likely to be caused by insects or moth larvae randomly chewing on them. Try searching for the following subjects – clothes damaged by insects – clothes damaged by larvae – what do moth holes look like? There’s a good artcile here too. Notice the holes are virtually the same as in some of my photos except they are cleaner holes than some of my examples – Do moths eat cotton?
Removing a drum paddle (lifter) to gain access to the bottom of the tub
Bleach
Undiluted bleach should not be used in a washing machine. It’s corrosive. Even dilute bleach can weaken laundry. Read the label carefully before using.
Sometimes you can get an obstruction out through the dispenser/tub hose or the heating element
If you suspect the obstruction is trapped somewhere in the middle of the drum you may be able to get to it through the hole in the outer drum where the dispenser hose is attached. This is where the water and detergent is washed into the drum from the soap drawer.
Sometimes an underwire gets mangled and trapped on the heating element and removing the element can allow access to it. However, it depends where the heater is, some are right at the front of the machine and very hard to access and some are at the back behind the rear panel and easy to access. This method is not recommended though unless desperate because it may involve stripping a washing machine down, and you may not be able to refit the heater even if you get it out.
Worse still you could refit it incorrectly and it pops out during a wash cycle flooding the kitchen, or you don’t get it located under its holding bracket and the drum bashes it relentlessly on spin.
However, this article looks at where is the heater and how to remove it?
I’ve written another article on this subject here Holes in clothes photos which features many photos sent in to me with holes of all sizes and on various laundry.
If tiny holes are appearing only in t-shirts at the front
This can be caused by physical wear caused by rubbing against jeans, belts, and even kitchen worktops whilst working in the kitchen.
Photos of damaged laundry
For further details see the many comments below this article. Several people have identified their holes in the front lower half of t-shirts as being caused by rubbing against the kitchen worktop. Granite worktops are particularly implicated.
Try this experiment
Jeff suggested a great experiment in my comments section, which should prove whether the small holes in t shirts are caused by the washing machine or by the wearer.
Buy a new t shirt of the type that has been getting the holes (but never wear it). Each time you do laundry, throw it in with everything else and see if it ever gets holes. If it does, then as it has never been worn it’s probably the washing machine/detergent/faulty fabric. But if holes do not appear, then the holes in the other t shirts are most probably being caused by something the wearer of the shirts is doing to stress the fabric and not caused by washing.
Protect t-shirts and other laundry when washing
Use a net washing bag to protect delicate laundry, which helps prolong the life of clothes, and prevents wear and tear from friction
Comments now disabled
There are many comments below to research but new comments have been disabled because they have reached a large enough number for it to be impractical for most people to read them – let alone even more.
However, I strongly advise you take the time to read through them if this is a serious problem for you as there are many thoughts, speculations and ideas that may help. If you have any useful advice or information please contact me and I can either open up the comments for you or add your thoughts to the article.
Repairs
Fixed-price repairs, Pay monthly options, Repair & protect your whole appliance..
Save Money Now
Subscribe to Which? today and start saving money now. Subscription offers often available.
Spares
Spares4Appliances is a spares company run by repair engineers who understand all about spare parts for appliances.
I am reading this website amazed. I have been having this problem with my tee-shirts the last couple of years. ALL my cotton tee-shirts end up with a collection of small holes at the bottom of the front of the shirt. Today is the last straw which has lead to my looking it up on the web and finding you lot!! Today I am wearing a brand new white tee-shirt from GAP. I have never worn it before, it is new yesterday. I have just looked down and found 3 holes at the bottom of the front. Can somebody PLEASE explain this to me? It’s driving me crazy!
Just found this forum after doing a search on Google. I am having exactly the same problem with my washing. Small holes in clothes, mainly tee shirt type material. I have a 6KG machine, 1200 rpm. I am going to write to the manunfactuer about this problem as it’s totally unacceptable, not to mention expensive! Will post the reply, if I get one! :-/
I’m not crazy! We’re currently renting, so I’m not familiar with the life of our current washer/dryer. For several months now I’ve been finding small holes in clothing – mostly in cotton t-shirt type material. At first I assumed it was something I was doing wrong. So, I no longer buy any off brand detergent. I’ve been careful to wash on the right speeds and not fill the tub too full. The holes remain and they appear even in clothing worn only once. I know the holes were not there prior to washing. Some of the holes are small and some almost look like small tear. It doesn’t seem to matter what brand of clothing – Old Navy, Target, Aeropostale, GAP. This is frustrating!
Kristin, thanks for your input. You said it’s a washer dryer and described the items affected, but what is the drum capacity size and the top spin speed?
The washer is a Kenmore 80 Series. Where do I find the other info? I’m renting so don’t have paperwork on this.
We have a Hotpoint Aquarius 1200 washing machine, bought from a reconditioner in late 1998. I don’t know the drum size, I would guess it’s a standard small one, and the max spin speed is 1200 although we normally use 1100 or 1000.
It’s been great with no problems at all until a year or so ago when small holes started appearing in the front of my wife’s t-shirts. She stopped wearing a beloved pair of jeans because she thought they were to blame.
Unfortunately the holes kept appearing, exclusively in stretchy cotton but on sleeves and the back as well as the front. Usually it’s one or two holes per garment, each torn and about 1-2mm across. My wife reports the machine has also become noisier, although we’ve also moved it so that may be a factor.
From my very limited knowledge of washing machines, I suspect the bearings have worn, bringing the inner drum into contact with the outer drum – does this sound plausible? In any case it isn’t only new machines. We’re now planning to replace the washing machine and were thinking of a bigger drum to wash duvets, but are worried we might find the same problem with a new one!
I too have the same problem – mostly with T shirt type clothing and one or two holes in each garment – this is so annoying – lots of decent new tops are ruined – I called the manufacturer today and have arranged a service visit – we have a Bosch with a 6KG drum and 1200 spin speed – have tried all spin speeds and different load sizes – most of the holes are around the bottom of garmetn but not all (some on sleeves). Has anyone else called out a manufacturer and had them agree that the washing machine is at fault ?- I dont want to have to pay for their service visit and can guess that they will say it is not the machine at fault but I have eliminated everything else and know it is.
Kristin: Your machine isn’t a UK one so I don’t have any info on it. Thanks for the photos. I’ll link to them shortly.
Andrew: Yes, if drum bearings wear badly the drum can scrape on the heating element and outer tub.
My friend has just pointed out holes in the top back of my t-shirt material tunic. I have noticed small holes in the t-shirts of my sons and husband but thought that they must have caught them or done something to cause the holes. I bought a new Zanussi washing machine 1400 spin with 7kg capacity. I am sure that the washing machine is to blame.
This sounds way too familiar! We are having exactly the same problems, holes in clothing for the last year or so. We actually find items wedged in the gap between the door and the seal, which when released have the holes and snagging. I emailed the manufacturer who said we would need to get a service engineer out as the machine (waher/dryer) is out of warranty. We have decided after the most recent incident yesterday to no longer use our machine, it is almost 10 years old so guess it’s time for a new one, rather than pay to get it repaired. Some basic/cheaper items, like vests and pillow cases have been ruined, other quite expensive tops and t-shirts also. Does anyone know if these items would be covered via home insurance for accidental damage?