Replacing a Tumble Dryer Heating Element
If your tumble dryer is no longer heating up or is taking a long time to dry clothes, the heating element may need to be replaced. This is a relatively simple DIY task that can save you money on an engineer visit.
Here are the steps to remove and replace a tumble dryer heating element.
Before we begin…
- Disconnect the appliance from any power supply and isolate the supply so it cannot be accidentally reconnected while you are working on it.
- Wear gloves! While appliances are nice and smooth on the exterior and pose no risk to cuts etc, the inside of appliances can be extremely sharp as they are not designed for consumers hands to be inside the machine.
- If you are not confident in attempting any repair to a domestic appliance, then call an expert.
Materials needed:
- Replacement Tumble Dryer Heating Element
- Screwdriver
- Pliers
- Electrical tape
- Safety gloves and goggles
Instructions:
- Access the heating element – The heating element is usually located at the back of the tumble dryer behind a removable panel. Use a screwdriver to remove the screws holding the panel in place. Once removed, you should be able to see the heating element.
- Remove the old heating element – The heating element is held in place by wires and brackets. Carefully remove the wires and brackets using pliers, taking note of their position and how they are attached. Be gentle when removing the old heating element, as it may be fragile and can break easily.
- Install the new heating element – Attach the brackets and wires to the new heating element in the same position as the old one. Make sure the heating element is properly seated in its mounting bracket. Use electrical tape to secure any loose wires and prevent them from touching the metal casing of the tumble dryer.
- Reattach the panel and test the dryer – Replace the removable panel and secure it with the screws. Plug in the tumble dryer and turn it on to test the heating element. The dryer should now produce heat and dry clothes properly.
In conclusion, replacing a tumble dryer heating element is a straightforward DIY task that can save you money and time. Remember to wear safety gloves and goggles, and follow these steps carefully to ensure a successful replacement.
If you’re carrying out DIY Tumble Dryer Repairs, you might be interested in our wide range of Tumble Dryer Spares!
