How to Check & Clean Dishwasher Filters

Replacing a Dishwasher Filter

A dishwasher filter is an important component of your dishwasher that helps to remove food particles and debris from the water as it circulates through the machine.

Over time, this filter can become clogged with debris, which can affect the dishwasher’s performance and even cause damage to the appliance. In this article, we will guide you through the process of removing and replacing your dishwasher filter.

Before we begin…

1. Disconnect the appliance from any power supply and isolate the supply so it cannot be accidentally reconnected while you are working on it.
2. Wear gloves! While appliances are nice and smooth on the exterior and pose no risk to cuts etc, the inside of appliances can be extremely sharp as they are not designed for consumers hands to be inside the machine.
3. If you are not confident in attempting any repair to a domestic appliance, then call an expert.

Materials needed:

• Replacement Dishwasher Filter

Instructions:

1. Locate the filter – The filter in your dishwasher is usually located at the bottom of the appliance, beneath the lower spray arm. Depending on the make and model of your dishwasher, the filter may be in a different location, so consult your owner’s manual for specific instructions.
2. Remove the spray arm – To access the filter, you’ll need to remove the lower spray arm. Depending on your dishwasher model, the spray arm may be held in place with a clip or screw. Use a screwdriver or pliers to remove the clip or screw, and then carefully lift the spray arm out of the way.
3. Remove the filter – Once you’ve removed the spray arm, you’ll be able to see the filter. It may be held in place with a locking mechanism, which you’ll need to release before you can remove the filter. Some filters simply twist or pull out, so consult your owner’s manual for specific instructions on how to remove the filter.
4. Clean the filter – Now that you’ve removed the filter, you’ll need to clean it thoroughly. Use a soft-bristled brush or a toothbrush to scrub away any debris or food particles that may have accumulated on the filter. If the filter is particularly dirty, you may need to soak it in warm, soapy water for a few minutes to help loosen the debris.
5. Replace the filter – Once the filter is clean, it’s time to put it back in place. Simply reverse the steps you took to remove the filter, making sure to lock it back into place if necessary.
6. Replace the spray arm – With the filter back in place, it’s time to replace the lower spray arm. Carefully position the spray arm back into place, and then secure it with the clip or screw you removed earlier.
7. Turn on the power – With the filter and spray arm back in place, it’s time to turn the power back on to your dishwasher. Once you’ve done this, run a cycle to ensure that the dishwasher is working properly and that the filter is doing its job.

In conclusion, removing and replacing a dishwasher filter is a simple task that can greatly improve the performance of your dishwasher. By following these steps, you can keep your dishwasher running smoothly and help extend its lifespan.

For all your Dishwasher Repair needs, we’ve got you covered – check out our range of Dishwasher Spares today!