There are several error codes on Hotpoint Aquarius washing machines that are indicated by flashing lights. These are just basic ones from models WMA30, WMA31, WMA32 & WMA33 although they may be the same for other Hotpoint Aquarius models using led lights. Aquarius models with a proper digital display should indicate error codes in aread the full article..
Washing Machine Error Codes
Archive of all articles in the Washing Machine Error Codes category.
DE Error on Samsung washing machines (usually) means that “the door is open”. As with most error codes though you can’t take it literally because very often this error will display when the door is clearly closed. What it means is, that it thinks the door is open, presumably because it’s not getting power passedread the full article..
Error E35 on AEG washing machines and washer dryers indicates a fault on the filling system and is described as an “Overflow” fault. The machine believes it is overfilling and takes abortive action as described later. There are several possible causes listed, many of which a diy repairer is unlikely to find helpful. The possibleread the full article..
Error code F05 on some Hotpoint (and some Indesit) washing machines means the pressure switch has “jammed” on. So the washing machine thinks it is full of water and refuses to spin. It may indeed be full of water – but not necessarily. Before a washing machine spins the laundry, it needs a signal thatread the full article..
Error E52 on a Zanussi washing machine is defined as, “no signal from the tachometric generator”. It is referring to what we always call the tacho coil. This is a small coil on the end of the armature in the motor which turns inside a small magnet under the motor plug cover. As the motorread the full article..
The Hotpoint Aqualtis error code F02 means “Motor jammed or tacho off”, and the technical advice is – “check motor and module connections”. This coincidentally is exactly the same fault that Hoover use for their Nextra washing machine. They use an error code 7 instead, but the fault is the same on both washing machines.read the full article..