“I have an Indesit WD12 washer dryer. The programmer keeps turning/clicking around and i note that the on/off red light flashes on a cycle of 13 times on and off as the dial gets to a certain point. I have tried to reset it as in your suggestions ie turning the power off turning it to one of the ‘off’ black dots (there are 3 of these0 then turning it back on again but to no avail. Any ideas please?”I have an Indesit WD12 washer dryer. The programmer keeps turning/clicking around and i note that the on/off red light flashes on a cycle of 13 times on and off as the dial gets to a certain point. I have tried to reset it as in your suggestions ie turning the power off turning it to one of the ‘off’ black dots then turning it back on again but to no avail. Any ideas please?”
Resetting the dial on an Indesit will only work if it’s clicking round because you’ve changed the programme or if you have started a programme and want to change it. If the dial is clicking round because of a fault on the appliance then as soon as the fault is re-encountered it will start clicking round again. If the dial clicking round is accompanied by the led flashing 13 times the error is “Dryer fan does not work, dryer NTC faulty” The NTC is the thermostat controlling the dryer.
Related:
Find appliance repairs – Book washing machine (or other appliance) repair
- WARNING: Some washing machines can shock you even when unplugged! DIY repair safety advice
- Module PCB and Timer repairs (QER)
- Call out & labour charges by the washing machine manufacturers
- I have a 5 year parts guarantee – should I use it?
- Find a washing machine repairer (links ) (The most independent washing machine repairers referrer list available?)
- Program selector knob (dial) clicks round continuously
- General advice on appliance error codes
After posting a comment it will be visible only to you (above this text) until moderated