If you want to stack a tumble dryer on top of a Hoover washing machine or a washer-dryer then you need a stacking kit ( Why do you need a stacking kit? ).
Indesit washing machine error code F04 or light flashing 4 times
January 12, 2010 By Leave a Comment
An Indesit washing machine producing error F04 is producing an error code that means, “pressure switch jammed on empty – check pressure switch and module”. (or if fitted with a rotary dial that clicks round and round accompanied by 4 cyclical flashes of the LED).
What should I do with the old hot water tap when connecting a cold fill washing machine?
January 6, 2010 By 66 Comments
As virtually all modern washing machines are cold fill, what do you do with the old hot water tap which is no longer needed?
The old hot water tap should ideally be capped off by screwing a special blanking cap onto it. This is wise because I’ve heard of several cases where the unused hot tap has eventually started to drip, or even where the lever has been accidentally knocked partially on later. This can happen if the hot tap is in the kitchen sink cupboard. I’ve also seen cases where the washing machine itself moved about and knocked the lever when the hot tap was behind the washing machine. This isn’t so likely if your old hot water tap is a proper screw type but the ubiquitous red and blue lever taps are more prone to these issues and it’s safer to blank off any old unused washing machine tap, especially if they are installed out of sight.
Indesit washer dryer light flashes 13 times
January 3, 2010 By Leave a Comment
“I have an Indesit WD12 washer dryer. The programmer keeps turning/clicking around and i note that the on/off red light flashes on a cycle of 13 times on and off as the dial gets to a certain point. I have tried to reset it as in your suggestions ie turning the power off turning it to one of the ‘off’ black dots (there are 3 of these0 then turning it back on again but to no avail. Any ideas please?”I have an Indesit WD12 washer dryer. The programmer keeps turning/clicking around and i note that the on/off red light flashes on a cycle of 13 times on and off as the dial gets to a certain point. I have tried to reset it as in your suggestions ie turning the power off turning it to one of the ‘off’ black dots then turning it back on again but to no avail. Any ideas please?”
